€ 365,70 +VAT
| Szűrőfelület: | 20 m² | Show this |
|---|---|---|
| Méret: | 327 x 1200 mm | Show this |
| Szűrési eljárás: | Abreinigungsfilter | Show this |
| Leválasztási fok: | ≥ 99,9 % | Show this |
| Kivitel szerint: | Filterpatrone | Show this |
| Cikkszám: | KEMPER 15300820 | Show this |
| Gyártó szerint: | KEMPER fali szűrőkészülék / szűrőrendszerek | Show this |
| Kompatibilis készülékek: | KEMPER System 9000 (vor 11/2007) | Show this |
| Szűrőosztály: | M | Show this |
| Szűrőanyag: | Polyestervlies mit PTFE Beschichtung | Show this |
| Anyag: | Stützkorb aus Streckmetall, Filtermaterial vergossen | Show this |
/ db
€ 365,70 +VAT
Replacement filter as an alternative to KEMPER 1090442
Filter cartridge in the dimensions 327 x 1200 mm for use in:
High-performance Cleaning filter made of Polyester fleece with PTFE coating and a Filter area of 20 m². The non-stick coating with PTFE ensures very good cleanability of the Filter material. The filter cartridge corresponds to Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high filter efficiency of ≥ 99.9 %. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A belt wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.
The filter cartridge is easy to replace and is a cheaper polyester fleece alternative with a PTFE coating compared to the original KEMPER 1090442 cartridge, which has an ePTFE membrane.
Recommendation: In addition to this polyester fleece cartridge with a PTFE coating, we recommend the use of precoat - filter powder, which is also available an accessory in our webshop Initial treatment of the filter with Precoat filter poweder increases the service life of the filter and improves cleaning efficiency.
Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You will find special filter cartridges with the same dimensions but a different design in the filter.shop.
Warranty retention when used in KEMPER System 9000 (before 11/2007)
All Replica filters in the filter.shop are tested and approved by KEMPER. Devices are therefore covered by warranty when using our Replica filters in the KEMPER System 9000.
€ 168,00 +VAT
€ 207,90 +VAT
€ 156,10 +VAT
€ 162,40 +VAT
