KEMPER Filter cartridge - 350x1200 mm - ePTFE membrane - 20 m² for KEMPER

Replacement filter as a replica, alternative to KEMPER 1090447

Filter cartridge in the dimensions 350 x 1200 mm for use in:
 

• KEMPER System 9000 (from 11/2007)
• KEMPER WeldFil
• KEMPER PlasmaFil (long filters)
• KEMPER CleanAirTower (CAT)

High-performance Cleaning filter made of Polyester fleece with ePTFE membrane laminated on and a Filter area of 20 m². Thanks to the microporous membrane, even particularly fine dusts are separated directly on the filter surface and can be easily cleaned again. The filter cartridge complies with Dust classification M, tested in accordance with DIN EN 60335-2-69:2010 Annex AA, and achieves a very high Filter efficiency of ≥ 99.9 %. The Filter cartridge is open at the top, the bottom is closed except for a 13 mm hole for fastening. The Filter medium is cast in synthetic resin at the top and bottom. A strap wrapped spirally around the metal support basket prevents contact between the Filter medium and the support basket, but allows the necessary mobility for cleaning using rotary nozzles.

The Filter cartridge is easy to replace and is an alternative to KEMPER 1090447.

Important note: KEMPER replica. Only for KEMPER systems. Optimized filter for KEMPER extraction systems with rotary nozzles. Do not use for systems from other manufacturers with JET Pulse cleaning, even if the dimensions appear to fit. You can find special filter cartridges with the same dimensions but a different design in the filter.shop.

Warranty retention when used in KEMPER devices

All Replica filters in the filter.shop are tested and approved by KEMPER. The device warranty is therefore retained when our Replica filters are used in KEMPER devices.